| MachoPowerWagon.com http://www.machopowerwagon.com/phpBB3/ |
|
| 1978 Macho 440 Wheel Bolt Pattern http://www.machopowerwagon.com/phpBB3/viewtopic.php?f=5&t=726 |
Page 1 of 1 |
| Author: | twinplug [ Mon Mar 01, 2010 11:26 am ] |
| Post subject: | 1978 Macho 440 Wheel Bolt Pattern |
Any one out there to confirm my wheel bolt pattern? I so 5 x 5. Measuring back side of lug 1 to dead center lug 3. Someone said the 440 version has different axles? |
|
| Author: | palomino [ Mon Mar 01, 2010 12:12 pm ] |
| Post subject: | Re: 1978 Macho 440 Wheel Bolt Pattern |
nope, they all had the same pattern, 5 on 4 1/2 bolt circle.... |
|
| Author: | twinplug [ Mon Mar 01, 2010 1:11 pm ] |
| Post subject: | Re: 1978 Macho 440 Wheel Bolt Pattern |
Ok, am I correct on the method to obtain the pattern size? Thanks for the quick response. |
|
| Author: | palomino [ Mon Mar 01, 2010 1:56 pm ] |
| Post subject: | Re: 1978 Macho 440 Wheel Bolt Pattern |
not certain on how they measure them... |
|
| Author: | RumbleFish [ Tue Mar 02, 2010 5:23 pm ] |
| Post subject: | Re: 1978 Macho 440 Wheel Bolt Pattern |
i think you are measuring correct, although ive heard both what you describe and center to center of lugs 1 to 3. it should definitely be 5x4.5 if it still has the 70's stuff under it. |
|
| Author: | twinplug [ Tue Mar 02, 2010 11:34 pm ] |
| Post subject: | Re: 1978 Macho 440 Wheel Bolt Pattern |
Ok, sounds good thank you both for the help. |
|
| Author: | ben [ Thu Apr 22, 2010 12:11 am ] |
| Post subject: | Re: 1978 Macho 440 Wheel Bolt Pattern |
When measuring a 5 lug bolt pattern you measure from the outer edge of the lug at the 12 o'clock position down to the middle of the the lug at the 4 o'clock position. This method is used only for 5 lug wheels and if you have more or less the measuring method will change. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|