Spot weld cutter and lots of patience
| MachoPowerWagon.com http://www.machopowerwagon.com/phpBB3/ |
|
| Tailgate issue http://www.machopowerwagon.com/phpBB3/viewtopic.php?f=5&t=1746 |
Page 1 of 1 |
| Author: | Shogun1332 [ Mon May 21, 2012 4:12 pm ] |
| Post subject: | Tailgate issue |
The tailgate on the macho lost a linkage today, i noticed there's no access panel and was praying that it wouldn't ever lose a linkage but alas it did. So I was wondering if anybody knew a good way to get in the tailgate and re attach the linkage? |
|
| Author: | ben [ Tue May 22, 2012 7:38 pm ] |
| Post subject: | Re: Tailgate issue |
Spot weld cutter and lots of patience
|
|
| Author: | Shogun1332 [ Sun May 27, 2012 2:44 am ] |
| Post subject: | Re: Tailgate issue |
well the linkage actually broke so I ended up just taking the whole assembly for the passenger side off. Then when I couldn't find a replacement linkage anywhere I ended up deciding that the driver's side tailgate lock could hold the tailgate itself, so I fabricated a blocking plate to cover the empty hole on the passenger side (bad wasp problem around here) and so far it seems to be holding up alright. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|