| MachoPowerWagon.com http://www.machopowerwagon.com/phpBB3/ |
|
| can some one measure the inner and outer diameter of stripe http://www.machopowerwagon.com/phpBB3/viewtopic.php?f=5&t=1566 |
Page 1 of 1 |
| Author: | macho78 [ Mon Oct 10, 2011 12:32 pm ] |
| Post subject: | can some one measure the inner and outer diameter of stripe |
I'm looking the measurement of the inner and outer diameter of the yellow pin stripe on a macho rim. I just sand blasted my only original macho rim, any help would be great. I plain on getting a set made up that are precut so I can just lay them on the top of the rim instead of trying to apply it by hand and make round. The ones I just did on my rims I'm not happy with. Thanks!! |
|
| Author: | Tophand [ Mon Oct 10, 2011 9:19 pm ] |
| Post subject: | Re: can some one measure the inner and outer diameter of str |
My 77' Macho rims yellow stripe measures 1/4" wide total. |
|
| Author: | GoGoMacho [ Tue Oct 18, 2011 2:13 pm ] |
| Post subject: | Re: can some one measure the inner and outer diameter of str |
True, they should be 1/4" wide. They were originally painted on from factory. Phoneix graphix sends stripes in there kit but they are straight lines (1/4") and near impossible to shape to the round wheel. I had a professional do mine for $25.00 per wheel and they came out super. you might look into it. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|