MachoPowerWagon.com
http://www.machopowerwagon.com/phpBB3/

DANA 44 bearings.
http://www.machopowerwagon.com/phpBB3/viewtopic.php?f=21&t=585
Page 1 of 1

Author:  LDB [ Thu Oct 22, 2009 9:44 pm ]
Post subject:  DANA 44 bearings.

I went off-roading last week only to totally destroy driver side wheel bearings on the way home. When the bearings went, the spindle ate into the steering knuckle. I finally found a knuckle on ebay, but I can't for the life of me find an exploded view of which way the bearings go back in. Since everything came out in tiny fragments, I am not sure of how they go back in properly. I think there is an inner and an outer bearing. But if any one could chime in here I am listening. I do not have locking front hubs. BTW the truck did phenomenal in the mud, I think I had a bad seal and the mud and water washed the grease out. Any help or pics would be greatly appreciated.

Author:  palomino [ Fri Oct 23, 2009 1:58 am ]
Post subject:  Re: DANA 44 bearings.

http://mopartruckparts.com/tech/t010.html
I hope this helps you out!!!!

Author:  LDB [ Fri Oct 23, 2009 9:33 am ]
Post subject:  Re: DANA 44 bearings.

Thank you so much! That helps a ton, still can't believe that set up isn't on the internet more frequent. I figured it being a Dana it would be easily looked up online. Anyway I see the direction of the bearings now. You the man! :D :D :D

Author:  palomino [ Fri Oct 23, 2009 8:15 pm ]
Post subject:  Re: DANA 44 bearings.

anytime! :)

Author:  LDB [ Sat Oct 24, 2009 12:11 pm ]
Post subject:  Re: DANA 44 bearings.

Posting this info on here I found after days of searching and after palomino helped me out, in case anyone else runs into same probs.

http://ramchargercentral.com/index.php? ... ow%3Bid=35

Author:  palomino [ Sat Oct 24, 2009 12:28 pm ]
Post subject:  Re: DANA 44 bearings.

that also looks like a good article....

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/